|
|||||
 |
|
|
|
|
|
Unified efficient
layerwise theory for smart beams with segmented
extension/shear mode, piezoelectric actuators and sensors
Santosh Kapuria and Peter Hagedorn |
|
Vol. 2 (2007), No. 7, 1267–1298
|
Abstract |
|
A unified coupled efficient layerwise theory is presented for the dynamics of smart laminated beams with surface-mounted and embedded piezoelectric actuators and sensors with arbitrary poling directions, acting in extension or shear mode. The theory considers a global third-order variation across the thickness combined with a layerwise linear variation for the axial displacement, expressed in terms of only three primary variables, and accounts for the transverse normal strain due to the electric field in the approximation for the transverse displacement. The electric potential is approximated as piecewise quadratic across sublayers. A finite element is developed which has two physical nodes with mechanical and some electric potential degrees of freedom (DOF), and an electric node for the electric potentials of the electroded surfaces of the piezoelectric patches. The electric nodes eliminate the need for imposition of equality constraints of the electric DOF on the equipotential electroded surfaces of the segmented piezoelectric elements and result in significant reduction in the number of electric DOF. The electric DOF associated with the physical nodes allow for the inplane electric field that is induced via a direct piezoelectric effect. The accuracy of the formulation is established by comparing the results with those available in literature and the 2D piezoelasticity solutions for extension and shear mode actuators, sensors and adaptive beams. The effect of segmentation of the electroded surface on the deflection, sensory potential and natural frequencies is illustrated for both extension and shear mode cases. The influence of the location of extension and shear mode actuators and sensors on the response is investigated for a hybrid mode composite beam. The effect of actuator thickness on the actuation authority is studied. |
PDF Access Denied
We have not been able to recognize your IP address
3.145.119.199
as that of a subscriber to this journal.
Online access to the content of recent issues is by
subscription, or purchase of single articles.
Please contact your institution's librarian suggesting a subscription, for example by using our journal-recommendation form. Or, visit our subscription page for instructions on purchasing a subscription.
You may also contact us at
contact@msp.org
or by using our
contact form.
Or, you may purchase this single article for USD 45.00:
Keywords
extension mode, shear mode, zigzag theory, finite element,
hybrid beam, dynamics, piezoelectricity, electric node
|
Milestones
Received: 19 September 2006
Accepted: 20 February 2007
Published: 1 September 2007
|
Authors |
| Santosh Kapuria | |
| Dynamics and Vibrations Group Department of Mechanical Engineering Technische Universität Darmstadt Hochschulstrasse 1 64289 Darmstadt Germany |
|
| Peter Hagedorn | |
| Dynamics and Vibrations Group Department of Mechanical Engineering Technische Universität Darmstadt Hochschulstrasse 1 64289 Darmstadt Germany |
|
|
