Vol. 13, No. 1, 2018

Download this article
Download this article For screen
For printing
Recent Issues

Volume 14
Issue 2, 193–236
(in progress)

Issue 1, 1–191

Volume 13, 4 issues

Volume 12, 5 issues

Volume 11, 5 issues

Volume 10, 5 issues

Volume 9, 5 issues

Volume 8, 8 issues

Volume 7, 10 issues

Volume 6, 9 issues

Volume 5, 6 issues

Volume 4, 10 issues

Volume 3, 10 issues

Volume 2, 10 issues

Volume 1, 8 issues

The Journal
Editorial Board
Research Statement
Scientific Advantage
Submission Guidelines
Submission Form
Ethics Statement
Author Index
To Appear
ISSN: 1559-3959
Other MSP Journals
This article is available for purchase or by subscription. See below.
Numerical and experimental study on incremental forming process of Al/Cu bimetals: influence of process parameters on the forming force, dimensional accuracy and thickness variations

Mohammad Honarpisheh, Morteza Keimasi and Iman Alinaghian

Vol. 13 (2018), No. 1, 35–51
DOI: 10.2140/jomms.2018.13.35

In the present study, a finite element method was carried out on the single point incremental forming process of explosive-welded Al/Cu bimetal. The effect of process parameters, such as the tool diameter, vertical pitch, sheet thickness, pyramid angle, and process strategies, were investigated on the forming forces, dimensional accuracy, and thickness distribution of a truncated pyramid with FEM approaches. The results obtained from the simulation were validated by experiments. The findings indicated that by increasing the tool radius and vertical pitch size, the forming force increases and the wall thickness decreases. The finite element prediction for forming force, thickness distribution, and process strategies shown good agreement with experiments.

PDF Access Denied

However, your active subscription may be available on Project Euclid at

We have not been able to recognize your IP address as that of a subscriber to this journal.
Online access to the content of recent issues is by subscription, or purchase of single articles.

Please contact your institution's librarian suggesting a subscription, for example by using our journal-recom­mendation form. Or, visit our subscription page for instructions on purchasing a subscription.

You may also contact us at contact@msp.org
or by using our contact form.

Or, you may purchase this single article for USD 45.00:

incremental sheet forming, force, dimensional accuracy, explosive welding, FEM
Received: 29 June 2017
Revised: 5 October 2017
Accepted: 5 November 2017
Published: 7 April 2018
Mohammad Honarpisheh
University of Kashan
Morteza Keimasi
University of Kashan
Iman Alinaghian
University of Kashan