Download this article
 Download this article For screen
For printing
Recent Issues

Volume 19
Issue 5, 747–835
Issue 4, 541–746
Issue 3, 303–540
Issue 2, 157–302
Issue 1, 1–156

Volume 18, 5 issues

Volume 17, 5 issues

Volume 16, 5 issues

Volume 15, 5 issues

Volume 14, 5 issues

Volume 13, 5 issues

Volume 12, 5 issues

Volume 11, 5 issues

Volume 10, 5 issues

Volume 9, 5 issues

Volume 8, 8 issues

Volume 7, 10 issues

Volume 6, 9 issues

Volume 5, 6 issues

Volume 4, 10 issues

Volume 3, 10 issues

Volume 2, 10 issues

Volume 1, 8 issues

The Journal
About the journal
Ethics and policies
Peer-review process
 
Submission guidelines
Submission form
Editorial board
 
Subscriptions
 
ISSN 1559-3959 (online)
ISSN 1559-3959 (print)
 
Author index
To appear
 
Other MSP journals
This article is available for purchase or by subscription. See below.
Frictional receding contact problem of a functionally graded orthotropic layer / orthotropic interlayer / isotropic half plane system

Hüseyin Oğuz, İlkem Turhan Çetinkaya and İsa Çömez

Vol. 19 (2024), No. 4, 651–667
Abstract

A frictional receding contact problem of a functionally graded (FG) orthotropic layer / homogeneous orthotropic interlayer / homogeneous isotropic half plane system is considered. The FG layer is loaded by a rigid cylindrical punch with normal and frictional forces. While the lower layer and half plane fully bonded to each other, receding contact occurs between the upper and lower layers. It is assumed that the elastic stiffness constants for the FG layer vary exponentially in the depth direction and the Poisson’s ratios of the system are constant. The problem is converted into a system of Cauchy type singular integral equations in which the unknowns are the contact stresses on the contact areas between the punch and the FG layer, and between the FG layer and the homogeneous layer. The Gauss–Jacobi quadrature is used to discretize and collocate the singular integral equations leading to a system of algebraic equations about unknowns. Thus, the effects of some parameters such as the friction coefficient, inhomogeneity parameter, indentation load, punch radius, thickness of the upper layer on the contact areas, and the contact stresses, are presented by the results of parametric analysis.

PDF Access Denied

We have not been able to recognize your IP address 18.117.170.91 as that of a subscriber to this journal.
Online access to the content of recent issues is by subscription, or purchase of single articles.

Please contact your institution's librarian suggesting a subscription, for example by using our journal-recom­mendation form. Or, visit our subscription page for instructions on purchasing a subscription.

You may also contact us at contact@msp.org
or by using our contact form.

Or, you may purchase this single article for USD 45.00:

Keywords
functionally graded materials, orthotropic material, receding contact, singular integral equation
Mathematical Subject Classification
Primary: 74M15
Secondary: 74S99, 45E05
Milestones
Received: 23 October 2023
Revised: 11 February 2024
Accepted: 13 May 2024
Published: 28 August 2024
Authors
Hüseyin Oğuz
Department of Mathmematics
Kütahya Dumlupınar University
Kutahya
Turkey
İlkem Turhan Çetinkaya
Department of Mathmematics
Kütahya Dumlupınar University
Kütahya
Turkey
İsa Çömez
Department of Civil Engineering
Karadeniz Technical University
Trabzon
Turkey