|
|||||||
 |
|
|
|
|
|
Author Index – F
|
Faal, Teymoori
Anti-plane deformation of orthotropic strips with multiple defects
|
|
Fadeev, Egor
Stretching of chiral tubes obtained by rolling-up plates of cubic crystals with various orientations
|
|
Fafitis, Apostolos
Axial compression stability of a crisscross section column composed of concrete-filled square steel tubes
Experimental and analytical investigation of the behavior of diaphragm-through joints of concrete-filled tubular columns
Shear capacity of T-shaped diaphragm-through joints of CFST columns
|
|
Faghih Shojaei, Mostafa
Buckling and postbuckling behavior of functionally graded timoshenko microbeams based on the strain gradient theory
|
|
Fagiano, Christian
Mixed piezoelcetric plate elements with continuos transverse electric displacements
|
|
Fan, Cuiying
Extended displacement discontinuity method for crack analysis in 3D two-phase transversely isotropic magnetoelectroelastic media
|
|
Fan, Jiadi
Particle swarm optimization for curved beams in multistable structures
|
|
Fang, Daining
Plastic yield and collapse mechanism of planar lattice structures
|
|
Fang, Yanan
A new element-free Galerkin method for 3D elasticity problems
|
|
Fantin, Mathias
Resistance of flat vaults taking their stereotomy into account
|
|
Fariborz, Shahriar
Analysis of multiple axisymmetric annular cracks
Anti-plane deformation of orthotropic strips with multiple defects
|
|
Fateh, Mahmood
Fracture and fatigue crack growth analysis of rail steels
Mechanical and fracture analysis of welded pearlitic rail steels
|
|
Favier, Véronique
A contribution to a critical review of FSW numerical simulation
|
|
Febbo, Mariano
Multimodal piezoelectric device for energy harvesting from engine vibration
|
|
Fekirini, Hamida
Using a CZM and XFEM technique to predict the damage of aluminum notched reinforced with composite patch
|
|
Feng, Changxi
Studies on performance and failure mode of T-shaped diaphragm-through connection under monotonic and cyclic loading
|
|
Feng, Miaolin
Pull-in instability of multilayered quasicrystal cantilever nanoactuator with bonding imperfections based on nonlocal theory
|
|
Feng, Xiaodong
Geometrical nonlinear dynamic analysis of tensegrity systems via the co-rotational formulation
|
|
Feng, Xiqiao
Fracture mechanics analysis of three-dimensional ion cut technology
|
|
Feng, Xue
The effect of thin film/substrate radii on the Stoney formula for thin/film substrate subject to nonuniform axisymmetric misfit strain and temperature
|
|
Feng, Zhenyu
A Semi-Analytical Solution for Free Vibration Analysis of Stiffened Cylindrical Shells
|
|
Ferjani, Mohamed
Numerical exploration of the Dang Van high cycle fatigue criterion: application to gradient effects
|
|
Ferrero, Laura
A new tailoring optimization approach for improving structural response and energy absorption capability of laminated and sandwich composites
Laminated and sandwich panels subject to blast pulse loading
|
|
Ferri, Enrico
Dynamic buckling of impulsively loaded prismatic cores
|
|
Fiolka, Mark
A critical analysis of interface constitutive models for the simulation of delamination in composites and failure of adhesive bonds
|
|
Fleck, Norman
Deep penetration and liquid injection into adipose tissue
Dynamic failure of clamped circular plates subjected to an underwater shock
Multi-hit armour characterisation of metal-composite bi-layers
The shear response of metallic square honeycombs
|
|
Fleming, Katherine
Tubular aluminum cellular structures: fabrication and mechanical response
|
|
Folkow, Peter
The closest isotropic, cubic and transversely isotropic stiffness and compliance tensor to arbitrary anisotropic material
|
|
Fortin, Jérôme
Thermomechanical modelling of friction effects in granular flow using the discrete element method
|
|
Fortunato, Antonio
A NUMERICAL MODEL FOR MASONRY STRUCTURES
Automatic generation of statically admissible stress fields in masonry vaults
Displacement capacity of masonry structures under horizontal actions via PRD method
|
|
Fosdick, Roger
A study of penalty formulations used in the numerical approximation of a radially symmetric elasticity problem
|
|
Fotovat Ahmadi, Iman
Effect of adding crumb tire rubber particles on mechanical properties of DCPD modified sulfur polymer mortars
|
|
Fountzoulas, Costas
Computational modeling of tungsten carbide sphere impact and penetration into High-Strength-Low-Alloy (HSLA) -100 steel targets
|
|
Fowler, Patrick
Symmetry conditions and finite mechanisms
|
|
Frąckowiak, Andrzej
New conception of FEM base functions applied to solving an inverse heat transfer problem
The analytical-numerical method for solution of the inverse problem for heat conduction equation
|
|
Franciosi, Patrick
Effective property estimates for heterogeneous materials with cocontinuous phases
|
|
Fraska, Agnieszka
Implementation of HAM and meshless method for torsion of functionally graded orthotropic bars
Mesh-free method based numerical experiment for estimation of torsional stiffness of long bone
|
|
Freddi, Francesco
Damage in domains and interfaces: a coupled predictive theory
|
|
Freed, Alan
Anisotropy in hypo-elastic soft-tissue mechanics, I: Theory
Anisotropy in hypoelastic soft-tissue mechanics, II: simple extensional experiments
Conjugate stress/strain base pairs for planar analysis of biological tissues
|
|
Freed, Yuval
Two-way thermomechanically coupled micromechanical analysis of shape memory alloy composites
|
|
Frémond, Michel
Damage in domains and interfaces: a coupled predictive theory
Thermal effects of collisions: Does rain turn into ice when it falls on frozen ground?
|
|
Fritzkowski, Paweł
Analytical approach to the problem of an auxetic layer under a spatially periodic load
Dynamics of a rope as a rigid multibody system
Stress and displacement analysis of auxetic quarter-plane under a concentrated force
|
|
Frostig, Yeoshua
Buckling and non-linear response of sandwich panels with a compliant core and temperature-dependent mechanical properties
Geometrically nonlinear thermo-mechanical response of circular sandwich plates with a compliant core
Nonlinear behavior of thermally loaded curved sandwich panels with a transvesely flexible core
|
|
Fu, Guo
Electroelastic effects on local-global buckling of piezoelectric cylindrical shells with stepped thickness
|
|
Fu, Kang
Identification of multilayered thin-film stress from nonlinear deformation of substrate
|
|
Fu, Tiantian
Numerical simulation of frozen soil under uniaxial and coupled dynamic–static impact loads
|
|
Fu, Yibin
Localized bulging of rotating elastic cylinders and tubes
|
|
Fu, Yi-Ming
Postbuckling and delamination growth for delaminated piezoelectric elasto-plastic laminated beams under hygrothermal conditions
|
|
Fuchs, Moshe
Design of crack-resistant two-dimensional periodic cellular materials
|
|
Fuentes, Paula
Mechanics of flying buttresses: the case of the cathedral of Mallorca
|
|
Fujieda, Hideki
Magneto-thermo-elastic stresses induced by a transient magnetic field in a conducting infinite plate
|
|
Fukamachi, Hiroyuki
Assessment of the mechanical properties of the nucleus inside a spherical endothelial cell based on micro-tensile testing
|
|
Fukuzawa, Yasushi
Effect of tip profile on cutting processability of trapezoidal cutting blade indented to aluminum sheet
|
|
