|
|||||
 |
|
|
|
|
|
|
|
Effect of number of
crowns on the crush resistance in open-cell stent design
Gideon Praveen Kumar, Keping Zuo, Li Buay Koh, Chi Wei Ong, Yucheng Zhong, Hwa Liang Leo, Pei Ho and Fangsen Cui |
|
Vol. 15 (2020), No. 1, 75–86
|
Abstract |
|
Our group is developing novel preferential covered carotid stents aimed at preventing friable parts from atherosclerotic plaques from dislodging into the cerebral blood flow, and also preserving external carotid artery (ECA) perfusion through slits on the membrane. Enhanced ECA flow rates can be achieved by designing bare metal stents with larger cells that can accommodate more slits for enhanced blood flow to the ECA where the stents have fewer crowns in the circumferential direction. The general perception is that the stent stiffness and thereby the crush resistance will decrease with fewer crowns in the circumferential direction. However, we observed the opposite effect. To study the effect of crown number on crush resistance of stents, finite element analysis (FEA) was used to evaluate the crush resistance of open-cell stent designs by varying the number of crowns. From FEA simulation results, it was found that the crush resistance of the open-cell stent design actually increases with fewer crowns. To verify this effect, three stent designs with different crown numbers were fabricated and subjected to crush resistance experimental testing. The experimental testing further confirmed the effect observed by FEA. Finally, a simplified analytical model was proposed to explain why the crush resistance of stent increases with a reduction in the number of stent crowns. From this study, we can infer that the stent’s crush resistance increases with reduction in the number of stent crowns in the circumferential direction. |
PDF Access Denied
We have not been able to recognize your IP address
3.136.97.64
as that of a subscriber to this journal.
Online access to the content of recent issues is by
subscription, or purchase of single articles.
Please contact your institution's librarian suggesting a subscription, for example by using our journal-recommendation form. Or, visit our subscription page for instructions on purchasing a subscription.
You may also contact us at
contact@msp.org
or by using our
contact form.
Or, you may purchase this single article for USD 45.00:
Keywords
stent crown, nitinol, membrane, carotid, stent crush
resistance finite element analysis
|
Milestones
Received: 11 June 2019
Revised: 16 December 2019
Accepted: 20 December 2019
Published: 26 February 2020
|
Authors |
| Gideon Praveen Kumar | |
| Institute of High Performance
Computing Singapore 138632 Singapore |
|
| Keping Zuo | |
| National University of
Singapore Singapore 119077 Singapore |
|
| Li Buay Koh | |
| National University of
Singapore Singapore 119077 Singapore |
|
| Chi Wei Ong | |
| National University of
Singapore Singapore 119077 Singapore |
|
| Yucheng Zhong | |
| Institute of High Performance
Computing Singapore 138632 Singapore |
|
| Hwa Liang Leo | |
| National University of
Singapore Singapore 119077 Singapore |
|
| Pei Ho | |
| National University of
Singapore Singapore 119077 Singapore |
|
| Fangsen Cui | |
| Institute of High Performance
Computing Singapore 138632 Singapore |
|
