|
|||||
 |
|
|
|
|
|
|
|
A mass spring model
applied for characterizing mode I fracture in orthotropic
materials
Pradeepkumar Suryawanshi, Ramesh Singh and Abhishek Gupta |
|
Vol. 19 (2024), No. 2, 213–233
|
Abstract |
|
We describe a mass spring system (MSS), which is also referred as lattice model in the literature, predicting the load-displacement curve of the orthotropic materials. We have developed the MSS model of a double cantilever beam to capture the energy release rate in a mode I fracture of the orthotropic materials using two different formulations: maximum strain energy and maximum strain. Further, we have considered determination of fracture energy of cortical bone, as a case study, using the compliance based beam method (CBBM). This method avoids monitoring of crack length during fracture and provides the complete R-curve along with the plateau, which is the fracture energy. We have also obtained the R-curve from the load-displacement curve predicted by the MSS model and determined the fracture energy of cortical bone. As the maximum percentage error in fracture energy predicted by the MSS model for dehydrated and hydrated bone is 1.02 per cent and 1.15 per cent, respectively, the results are in good agreement with the experimental results. Thus, we have shown the ability of the MSS model to produce quantitative results as well in comparison to the models presented in the literature for simulation of a fracture, which give essentially qualitative results. We have used the validated MSS model for characterizing the load-displacement behavior of cortical bone for increasing mineralization and porosity. |
PDF Access Denied
We have not been able to recognize your IP address
3.236.100.210
as that of a subscriber to this journal.
Online access to the content of recent issues is by
subscription, or purchase of single articles.
Please contact your institution's librarian suggesting a subscription, for example by using our journal-recommendation form. Or, visit our subscription page for instructions on purchasing a subscription.
You may also contact us at
contact@msp.org
or by using our
contact form.
Or, you may purchase this single article for USD 45.00:
Keywords
MSS, orthotropic material, cortical bone, DCB test, CBBM,
fracture energy
|
Milestones
Received: 14 March 2023
Revised: 12 October 2023
Accepted: 8 December 2023
Published: 31 January 2024
|
Authors |
| Pradeepkumar Suryawanshi | |
| Department of Mechanical
Engineering Don Bosco Institute of Technology Mumbai India |
|
| Ramesh Singh | |
| Department of Mechanical
Engineering Indian Institute of Technology Bombay Mumbai India |
|
| Abhishek Gupta | |
| Department of Mechanical
Engineering Indian Institute of Technology Bombay Mumbai India |
|
| © 2024 MSP (Mathematical Sciences Publishers). |
